Concept Definition

Engineering

After the feasibility and conceptual studies are reviewed and accepted by the client, the project enters the engineering phase, which could include:

 Process
 Pressure Vessels
 Rotating Equipment
 Computing
 Piping, Civil Works
 Cost Control and Scheduling

Basic Engineering Design
The BED information package includes core documentation for the project, including:

Process:
 Process Flow Diagram (PFD) & Process Simulation Report
 Material Balance
 Process Calculation report – line sizing, equipment sizing, and etc
 Process Design Basis Report
 Equipment List & Process Equipment Data Sheet
 Instrument Process Data Sheet
 Process Engineering Flow Scheme (PEFS)
 Line Schedule, Piping Process Data & Tie in List
 Operating Instruction/ Process Control Philosophy Report
 Process Safety Design e.g.: Hazardous Area Classification Report & Drawing, Fire Fighting Facilities
 Utility Design e.g.: Cooling Water, Compress Air System, Utility Water & Steam

Mechanical:
 Mechanical / Equipment Technical Specifications
 Mechanical Design Basis
 Review Process Data & Type Selection
 Rating of Static Equipment e.g.: Heat Exchanger, Vessel

Piping:
 Basic Plot Plan
 Engineering Specifications

Piping Specification:
 Painting Specification
 Pipe Support Specification
 Insulation Specification
 Pipe Flexibility Specification
 Pipe Marking Specification

Instrument:
 Engineering Specification
 Instrument Schedule
 Instrument Design Basis
 Planning of Control Room

Electrical:
 Engineering Specification
 Motor & Electrical Load Schedule
 Electrical Design Basis
 Single Line Diagram
 Electrical Equipment Schedule

Civil & Structural:
 Engineering Specification
 Soil Investigation

Front End Engineering Design (FEED) Covering
During the FEED phase, EPT collects all the project specific requirements, technical information and rough investment cost for the project. The FEED can be divided into different packages, covering the different parts of the project. The FEED is used as a basis for bidding the execution phase contracts and as a design basis. Generally speaking, the FEED includes all the studies to be performed before ordering the main equipment.

Detail Engineering Design (DED) is the essential bridge between the basic engineering design and construction and installation phase of a project which is required to translate all ideas into concrete reality.

DED involves close coordination and synchronization among various disciplines of engineering, all in house resources for interactive and progressive manner. With having the DED, is vital to the owner flexibility time to execute the project. In EPT, we have a dedicated team of reliable and knowledgeable managers, engineers and designers who are able to provide the complete detail engineering design solution.

Computer aided design techniques are extensively used as design aids to help develop optimum layout & design to assure maximum construction, operational & maintenance convenience, and detailed construction drawings with bill of materials are extracted automatically from the system, ensuring highest degree of accuracy and error-free drawings. We adhere to relevant standards, specifications, procedures and relevant authorities.

Our Detail Engineering Design Package generally contains the following:

Process:
 Process Flow Diagram (PFD) & Process Simulation Report
 Material Balance
 Process Calculation report – line sizing, equipment sizing, and etc
 Process Design Basis Report
 Equipment List & Process Equipment Data Sheet
 Instrument Process Data Sheet
 Process Engineering Flow Scheme (PEFS)
 Line Schedule, Piping Process Data & Tie in List
 Operating Instruction/ Process Control Philosophy Report
 Process Safety Design e.g.: Hazardous Area Classification Report & Drawing, Fire Fighting Facilities

Mechanical:
 Strength Calculation
 Mechanical Engineering Drawings
 Calculation of Rotating Machinery
 Requisition
 Review & Check Vendor Drawing
 Identify & propose platform or attachment on equipment
 Loading Data
 Insulation & Painting Information

Piping:
 Piping Route Study
 Structure & Pipe Rack Information
 Piping Flexibility & Nozzle Orientation Analy
 Pipe Support Information
 Piping General Arrangement & Isometric Drawing
 Piping Bill of Quantity
 Requisition of Piping Component & Piping Specialty

Electrical:
 Interlock Diagram
 Loading Data
 Planning of Switch Room
 Cable Routing
 Cable Duct or Trench Plan
 Communication System Design
 Lighting Plan
 Lighting Design
 Bill of Quantity
 Requisition
 Review & Check Vendor Drawing
 Calculation Report e.g.: Load Flow Analysis Fault Level Load Study / Schedule Calculation

Civil & Structural:
 Grade Leveling Plan
 Road, Paving & Planning Design
 Sewer, Planning & Design
 Platform and Piling Design
 Foundation Design
 Structure Design
 Building Design
 Communication System Design
 Ventilation, Air Conditioning, Plan & Design
 Civil Material Requisition
Instrument:
 Instrument Schedule
 Planning of Control Room
 Instrument Utility Requirement
 Layout of Instrument
 Control Basis & Interlock Diagram
 Instrument Cable & Duct Routing
 Panel Instrument Arrangement
 Instrument Piping Hook-Up & Loop-Up
 Wiring, Tubing & Utility Piping Layout
 Instrument Bill of Quantity
 Instrument Requisition
 Review & Check vendor Drawing

Looking For Production or Processing Equipment?

Call Now ButtonCLICK HERE TO CALL US